Operation Manual


Parameter
Note
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
 You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
 Click the "Setup" of corresponding week, select the check box in front
of the period on the bottom of the interface, and input time value, there
are six periods to be set every day.
3. Click “Save” to complete the setup of working period.
Keep Time
It is the shortest time from when the target crowds in the detection area to
when it triggers alarm.
Sensitivity
It is to set the sensitivity which triggers alarm.
Alarm track
Select the check box, the tracking speed dome will automatically trigger
Alarm when the target triggers intelligent rule.
Track time
It is the time when the tracking speed dome automatically track the object
which triggers alarm after alarm occurs.
Record
Select check box and set record channel, the corresponding channel will
implement alarm and record automatically when alarm happens.
Note
 Please refer to "4.1.2.5 Set Path" for record file storage location query
and setting.
 The system record needs to meet following two conditions when alarm
happens.
 It has enabled motion detection record, please refer to "4.5.1.1
Configure Record Schedule" for more details.
 It has set auto record, please refer to '4.5.3 Configure Record
Control" for more details.
Record delay
System can delay the record for specified time after alarm ended.
Relay out
Connect alarm output port to alarm device (such as lamplight, siren and so
on), select check box and set alarm output device, enable alarm linkage
output port, and the system can activate corresponding alarm output device
when alarm occurs.
Alarm delay
It means the alarm delays a period of time to stop after alarm ends.
Send Email
Select check box, and the system will send email to inform users when
Alarm occurs.
Note
It needs to set Email before enabling the function, please refer to "4.2.6 Set
SMTP Parameter" for more details.