Operation Manual


Parameter
Note
PTZ
Select check box, set activation and corresponding serial number. The
system will activate and move to the selected preset, tour or pattern when
alarm occurs. Activation operation includes preset, tour and pattern.
Note
It needs to set PTZ before enabling the function, please refer to "4.3 Set
PTZ" for more details.
Snapshot
Select check box and set the channel number of snapshot. The
Corresponding channel will take snapshot automatically when alarm occurs.
Note
 Please refer to "4.1.2.5 Set path" for snapshot storage path query and
setting.
 It needs to enable motion snapshot before enabling the function, please
refer to "4.5.1.2 Snapshot Schedule" for more details.
Table 4-34
Step 5
Click "Save" to complete setting.
4.4.5.2.8 Set Missing Object
The system will generate alarm and activate the actions which have been set when the target is taken
away from the detection area and it exceeds the set time.
Precondition
Please refer to "4.4.4 Set Smart Plan" for the IVS smart plan which has been set preset or channel.
Operation Steps
Step 1
Select "Setup > Event > IVS > IVS" and the system will display the interface of "IVS".
Step 2
Select channel.
 When the "Channel" is set as "1", it is to set the intelligent rules of tracking speed dome.
 When the "Channel" is set as "2" or "3", it is to set the intelligent rules of panorama camera.
Step 3
Select "Preset" and the camera will quickly move to the corresponding position of the preset.
Note
It needs to implement the step when it is to set the intelligent rules of tracking speed dome.
Step 4
It is to configure the rule of missing object.
1. Click , double click the new rule, set rule name, and select rule type as "Missing Object", which is
shown in Figure 4-71.