Operation Manual


Parameter
Note
Snapshot
Select check box and set the channel number of snapshot. The
Corresponding channel will take snapshot automatically when alarm occurs.
Note
 Please refer to "4.1.2.5 Set path" for snapshot storage path query and
setting.
 It needs to enable motion snapshot before enabling the function, please
refer to "4.5.1.2 Snapshot Schedule" for more details.
Table 4-38
Step 4
Click "Save" to complete setting.
4.4.7 Set People Counting
4.4.7.1 Set Rules
The system will generate alarm and activate the actions which have been set when the number of
people in the statistics area reaches the set condition.
Precondition
It has set the people counting smart plan of the tracking speed dome, please refer to "4.4.4 Set Smart
Plan" for more details.
Operation Steps
Step 1
Select "Setup > Event > People Counting > People Counting" and the system will display the interface
of "People Counting", which is shown in Figure 4-75.