Operation Manual



Parameter

Note

It is the password which is used to log in FTP server.

Remote

Directory

Store it to the directory on the FTP server.

Emergency

(Local)

Select the check box, record or snapshot will be stored to local SD card

when FTP is abnormal.

Table 4-46

Step 4

Click "Save" to complete setting.

4.5.2.4 Set NAS Server

NAS function can be enabled when the path selects NAS storage mode. Select NAS storage to store

the files into the NAS server.

Step 1

Select "Setup > Storage > Destination > NAS" and the system will display the interface of "NAS", which

is shown in Figure 4-92.



Figure 4-92

Step 2

Select "Enable" to enable NAS function.

Step 3

It is to configure the parameters of NAS server, please refer to Table 4-47 for mode details.

Parameter

Note

Server Address

NAS server address.

Remote