Operation Manual


Step 4
Click "Save" to complete adding.
The newly-added user will be displayed in the user list, which is shown in Figure 4-102.
Note
 Click after adding user, you can modify user password, group to which the user belongs,
remark and authority; click to delete the added user, admin user can't be deleted.
 Click the corresponding of admin user and it can modify the password of admin user.
Figure 4-102
4.6.3 Add Onvif User
There is admin user by default for the system, you can add user. It can delete user, modify user
password and so on after adding user.
Step 1
Select "Setup > System > Account > Onvif User" and the system will display the interface of "Onvif
User", which is shown in Figure 4-103.