Operation Manual


5.3.3 Default
Caution
All the device configs will be restored to default except network IP address and user management,
please operate carefully.
Select "Setup > System > Default" and the system will display the interface of "Default", which is shown
in Figure 5-5.
Click "Default" to restore the device to default.
Figure 5-5
5.4 Upgrade
It is to upgrade the device firmware.
Note
It needs to reboot the device after upgrading wrong firmware file, otherwise, some module functions of
the device may become abnormal.
Step 1
Select "Setup > System > Upgrade" and the system will display the interface of "Upgrade", which is
shown in Figure 5-6.
Figure 5-6
Step 2
Click "Browse" to import upgrade file.