Operation Manual


SN
Name
Note
1
System menu
Click the function name on the system menu column to enter
corresponding config interface.
2
Code setting
Stream media protocol, types of network transmission protocol,
including TCP, UDP and multicast.
3
Video window
function
Please refer to "3.1.2 Video Window Function" for more details.
4
PTZ control
Please refer to "3.1.3.5 PTZ Control" for more details.
5
Video window
adjust
Please refer to "3.1.3 Video Window Adjust" for more details.
6
Switch stream
Display device list and switch main stream and substream.
Click on the right of corresponding camera, then you can switch
preview stream, please select according to actual situation. and
represents substream 1 and substream 2 respectively;
Means main stream.
For mainstream, it has big code stream with high image definition,
but it occupies big bandwidth, suitable for storage and monitoring.
For substream, code stream is comparatively smaller than
Main stream, the image is quite fluent and it occupies small
bandwidth, suitable for monitoring instead of main stream when
network bandwidth is not enough.
Table 3-1
3.1.2 Video Window Function
The video window function option is shown in Figure 3-2. Please refer to Table 3-2 for more details
about each icon.
Note
Different devices may have different functions, please refer to the actual interface for more details.
Figure 3-2
SN
Name
Note
1
Manual
Position
Manually position the tracking speed dome to the selected location of
corresponding panoramic camera.
Select image of panoramic camera channel, click the icon and click or
select randomly on the image of panoramic camera channel, the tracking
speed dome will automatically position the selected location.