Operation Manual


Click and the channel image will be displayed with full screen.
In full screen mode, double click the channel image or press Esc button to exit full screen display.
3.1.3.3 Adjust Fluency
It is to adjust the fluency of channel image.
Select the channel image, click to select fluency level, it supports realtime, general and fluency.
3.1.3.4 Intelligent Rules Display
It is to control video image display or disable rule info. It is enabled by factory default.
After configuring intelligent rules, click and select Enable, video image will display intelligent rules
and target detection box. Please select Disable if you need to cancel display.
3.1.3.5 PTZ Control
It is to operate the PTZ of tracking speed dome.
Note
Only tracking speed dome supports PTZ control function.
Click and the system will display PTZ control panel, which is shown in Figure 3-5. Please refer to
Table 3-4 for the function of each button.