Operation Manual


There might be video loss of a few seconds during the process when the camera is switched from non
WDR mode to WDR mode.
Backlight Mode
Note
BLC
The system can make exposure automatically according to the
environment, which is to make the image in the darkest area clear to be
seen.
WDR
According to the environmental brightness, it will lower the brightness of
the area with high brightness and enhance the brightness of the area
with low brightness, which is to make the objects in both high brightness
and low brightness area display clearly.
HLC
The system will constrain the brightness of the area with high brightness
and decrease the size of the halo area, which is to lower the brightness
of the whole image.
Table 4-4
Step 3
Click "Save" to complete settings.
4.1.1.1.4 Set WB
White balance means restoring the white object by camera. It can make white objects in image display
white in different environments after setting white balance mode.
Step 1
Click "WB" and the system will display the interface of "WB", which is shown in Figure 4-6.
Figure 4-6