Operation Manual


Figure 4-43
Step 2
Set tour.
1. Click "Add" to add a new tour.
2. Click "Add" to add a new preset.
Several clicks to add several presets.
3. Double click to select preset, and double click to set duration.
4. Double click the new tour name to modify name, click "Save" to complete setting.
Note
Click to delete corresponding tour and presets.
Step 3
Select tour, click "Start" to start tour.
Click "Stop" to stop tour.
4.3.3 Set Scan
Scan means that the camera can scan back and forth with a certain speed within a certain range
horizontally.
Step 1