Technical Specs

Dash Camera S400
Version 1.0.0
Quick Start Guide
Car Charger×1 Quick Start Guide×1
Electrostatic Stickers×1 Power Cable×1
Dash Camera×1 Bracket×1
Packing List
Insert the car charger into the
cigarette lighter and connect the
power cable of the camera.
Adjust the lens to the appropriate
angle, and the installation is completed.
Install the bracket on the camera
along the installation slot, and
insert one end of the power cable
into the power port.
Tear off the 3M glue on the bracket,
paste the camera on the
electrostatic paste, and lay cable as
shown in the figure.
Wipe the front windshield clean.
Stick the electrostatic paste on the
glass and ensure that it is free of
bubbles.
Installing Camera
Download and register the App
Factory Default Information
Wi-Fi: Imou-xxxxxx (The last 6 digits of serial number)
Password: 12345678
Scan the following QR code to download and install the App.
iOS Android
Run the App, select and connect Wi-Fi of the camera.
After successful connection to the camera, you can set parameters and real-time
preview video.
Operating with AppCamera Introduction
Screen
Indicator light
Menu ConfirmPower
Up Down
Speaker
Installation slot
TF card slot
Lens
Peripheral port
Power port
Cut off the power supply before installing TF card.