Quick Start Guide

12
 Please use the security code received in your email box to reset the password
within 24 hours; otherwise the security code becomes invalid.
 Security questions
1) On the Reset the password interface as shown in Figure 3-4, in the Reset Type
list, select Security Questions, the Security Questions interface is displayed.
See Figure 3-5.
If you did not configure the security questions before, in the Reset Type list, there
is no Security Questions.
2) In the Answer box, enter the correct answers.
Click Next and then follow the onscreen instructions to complete the password
resetting.
Adding Remote Device
You can add remote devices by adding the IP address.
This function is available after having configured the channel type as IP channel by selecting
Main Menu > CAMERA > CHANNEL TYPE.
Select Main Menu > CAMERA > REGISTRATION > Registration.
The Registration interface is displayed.
Click IP Search.
The searched devices are displayed.
Add the device by either of the following ways.
 Double-click the device, or select the check box of the device and then click Add.
 Click Manual Add, configure the parameters and then click Apply.
The device is displayed in the Added Device area. See Figure 3-6.