Specifications

Telit GE864 and GC864
Product Description
80273ST10008A Rev. 3 - 10/02/06
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 16 of 72
2.12.12 Indication of network service availability
The STAT_LED pin status shows information on the network service availability and Call status.
The pin is an Open Collector output where it is possible to directly connect a LED to show
information on the network service availability and Call status.
Therefore, the status indicated in the following table is reversed with respect to the pin status.
STAT_LED indications
LED status Device Status
permanently off device off
fast blinking
(period 1s, Ton 0,5s)
Net search / Not
registered / turning
off
slow blinking
(period 3s, Ton 0,3s)
Registered full
service
Permanently on a call is active
2.12.13 Automatic answer (Voice, Data or FAX)
After a specified number of rings, the module will automatically answer with a beep. The user can
set the number of rings by means of the command ATS0=<n>.
2.12.14 Supplementary services (SS)
 Call Barring,
 Call Forwarding,
 Calling Line Identification Presentation (CLIP),
 Calling Line Identification Restriction (CLIR),
 Call Waiting, other party call Waiting Indication,
 Call Hold, other party Hold / Retrieved Indication,
 Closed User Group supplementary service (CUG),
 Advice of Charge,
 Unstructured SS Mobile Originated (MO)
2.12.15 Acoustic signaling
The acoustic signaling of the GE864 and GC864 on the selected acoustic device are the following:
 Call waiting;
 Ringing tone;
 SMS received tone;
 Busy tone;
 Power on/off tone;
 Off Hook dial tone;
 Congestion tone;
 Connected tone;
 Call dropped;