Specifications

Telit GE864 and GC864
Product Description
80273ST10008A Rev. 3 - 10/02/06
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 43 of 72
IX. Wait for the end of programming green message OK
The Telit GE864 / GC864 module is now programmed with the new firmware.
NOTE: the above pictures show how the application dialogs appear for the GM862 product. The
GE864 / GC864 TFI application will look similar.
4.2 Update the GE864 firmware on your interface board
In order to allow you to update the GE864 firmware on a module already mounted on the interface
board, is mandatory to foresee on the interface board the presence of the following line (Test Point
or connector):
• C103/TXD Pin 37
• C104/RXD Pin 38
• ON_OFF Pin 4
• GND line (Pin 28 or 8 or 17 or 36 )
Is also recommended to foresee the presence on the interface board of the following line (Test
Point or connector):