Specifications

Telit GE864 and GC864
Product Description
80273ST10008A Rev. 3 - 10/02/06
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 60 of 72
+CGQREQ Quality of service profile (requested)
• •
Commands For Battery Charger QUAD PY
+CBC Battery Charge
• •
ETSI GSM 07.05 AT Commands for SMS and CB services QUAD PY
+CSMS Select message service
• •
+CPMS Preferred message storage
• •
+CMGF Message format
• •
+CSMP Set parameters in text mode
• •
+CSDH Show parameters in text mode
• •
+CSAS Save setting text mode
• •
+CRES Restore text mode settings
• •
+CSCB Select Cell Broadcast Message types
• •
Message configuration QUAD PY
+CSCA Service center address
• •
Message receiving and reading QUAD PY
+CNMI New message indications to Terminal Equipment
• •
+CMGL List messages
• •
+CMGR Read message
• •
Message sending and writing QUAD PY
+CMGS Send message
• •
+CMSS Send message from storage
• •
+CMGW Write message to memory
• •
+CMGD Delete message
• •
Custom AT Commands QUAD PY
#CGMI Request manufacturer identification
• •
#CGMM Request model identification
• •
#CGMR Request revision identification
• •
#CGSN Request product serial number identification
• •
#CIMI Request international mobile subscriber identity (IMSI)
• •
#CAP Change Audio Path
• •
#SRS Select ringer sound
• •
#SRP Select Ringer Path
• •
#STM Signalling Tones Mode
• •
#PCT Display PIN Counter
• •
#SHDN Software Shut Down
• •
#WAKE Wake from Alarm mode
• •
#QTEMP Query Temperature overflow
• •
#SGPO Set General Purpose Output
• •
#GGPI Read General Purpose Input
• •
#GPIO General Purpose Input/Output pin control
• •
#ADC Read Analog/Digital Converter Input
• •
#VAUX Auxiliary Voltage Output Control
• •
#MONI Monitor Cells
• •
#QSS Query SIM Status
• •
#ACAL Set Automatic Call
• •
#SMOV SMS Overflow
• •
#SHFEC Set Handsfree echo canceller
• •
#HFMICG Handsfree Microphone Gain
• •
#HSMICG Handset Microphone Gain
• •
#SHFSD Set Handsfree side tone
• •
#/ Repeat last command
• •
#NITZ Network Timezone
• •
#BND Select Band
• •
FTP CLIENT AT Commands QUAD PY
#FTPOPEN FTP Open command
• •