Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description
1vv0300604, Rev. ISSUE#14 - 22/01/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 130 of 214
6.5.7 Commands For GPRS
6.5.7.1 +CGACT - PDP context activate or deactivate
+ CGACT – PDP context activate or deactivate
Execute command
Read command
AT+CGACT?
Returns the current activation states for all the defined PDP contexts.
Write command
AT+CGACT = <state>[,
<cid>[, <cid>[,…]]]]
The command is used to activate or deactivate the specified PDP
context (s)
Parameters:
<state> - indicates the state of PDP context activation
0 - deactivated
1 - activated
<cid> - a numeric parameter which specifies a particular PDP context
definition (see +CGDCONT command)
Test command
AT+CGACT=?
Reports information on the supported PDP context activation states
parameters in the format: +CGACT: (0,1)
Example
AT+CGACT?
+CGACT: 1,1
OK
AT+CGACT=1,1
OK
Reference GSM 07.07
SW release Version A