Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description
1vv0300604, Rev. ISSUE#14 - 22/01/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 159 of 214
6.7.1.3 #SRP –Select Ringer Path
#SRP – select ringer path
Execute command
AT#SRP=<n>
Selects the audio path towards whom sending ringer sounds and all
signaling tones.
Parameter:
<n> - Ringer path number
0 - sound output towards current selected audio path (see
command #CAP)
1 - sound output towards handsfree
2 - sound output towards headset
3 - sound output towards Buzzer Output pin GPIO7
Note: In order to use the Buzzer Output an external circuitry must be
added to drive it properly from the GPIO7 pin, furthermore the
GPIO7 pin direction must be set to Buzzer output (Alternate function)
see command #GPIO.
Read command
AT#SRP?
Reports the current ringer path setting in the format: #SRP:<n>.
Write command
Test command
AT#SRP=? Reports the supported values for the parameter <n>.
Example
AT#SRP=?
#SRP=(0-3)
OK
AT#SRP=3
OK
Reference Telit GM862-GPRS AT Command Specification
SW release Version A