Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description
1vv0300604, Rev. ISSUE#14 - 22/01/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 16 of 214
2.7 Antenna
The antenna that the customer chooses to use, depending on his application, should fulfil the
following requirements:
Frequency range Standard Dual Band frequency range,
Standard Tri Band frequency range for -PCS
Bandwith 80 MHz in GSM & 170 MHz in DCS & 140
MHz PCS band
Gain > 0 dB (referenced to l/2 dipole)
Impedance 50 ohm
Input power > 2 W peak power
VSWR absolute
max
<= 10:1
VSWR
recommended
<= 2:1
NOTE: PCS 1900 frequency coverage is required only for the Telit GM862-PCS module
2.7.1 Antenna connector
The Telit GM862-GPRS module includes a 50 Ohm MMCX coaxial female 2 PIN Angle Coax SMD
J01341A0081 connector to allow the antenna connection.
On the user application side the following connector must be used: