Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description

1vv0300604, Rev. ISSUE#14 - 22/01/04

6.7.1.4 #STM - Signalling Tones Mode

#STM – signalling tones mode

Execute command

Read command

AT#STM?

Reports the current signaling tones status in the format:#STM: <mode>

Write command

AT#STM = <mode>

Enables/disables the signaling tones output on the audio path selected

with #SRP command

Parameter :

<mode> - signaling tones status

<mode> = 0 - signaling tones disabled

<mode> = 1 - signaling tones enabled

Test command

AT#STM=? Reports supported range of values for <mode> parameter.

Example

Reference Telit GM862-GPRS AT Command Specification

SW release Version B

6.7.1.5 #PCT – display PIN Counter

#PCT – display PIN counter

Execute command

Read command

AT#PCT?

Reports the PIN/PUK or PIN2/PUK2 input remaining attempts,

depending on +CPIN requested password in the format:

#PCT:<n>

Note: If +CPIN requires the PIN then max 3 attempts are allowed,

after that the PUK code is requested; if even PUK is input wrong for

other three time then #PCT:0 and SIM remains blocked.

Write command

Test command

Example

Reference Telit GM862 AT-GPRS Command Specification

SW release Version A