Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description
1vv0300604, Rev. ISSUE#14 - 22/01/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 173 of 214
6.7.1.19 #SHFSD – Set Handsfree side tone
#SHFSD – set handsfree side tone
Execute command
Read command
AT#SHFSD? Return the current status in the format:
#SHFSD: <mode>
Write command
AT#SHFSD = <mode> Set the sidetone on handsfree audio output.
Parameter
<mode>:
0 - disabled - headset mode (default)
1 - enabled - handsfree mode
2…255 reserved
Note: This setting returns to default after power off.
Test command
AT#SHFSD=? Returns the supported range of values of the parameter <mode>.
Example
Reference Telit GM862-GPRS AT Command Specification
SW release Version A
6.7.1.20 #/ – Repeat last command
#/ – Repeat last command
Execute command
AT#/
It is used to execute again the last received command.
Note: This command replaces the A/ command
Read command
Write command
Test command
Example
Reference Telit GM862-GPRS AT Command Specification
SW release Version A