Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description
1vv0300604, Rev. ISSUE#14 - 22/01/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 174 of 214
6.7.1.21 #BND – Select Band (DCS 1800 or PCS 1900)
#BND – Select Band (DCS1800 or PCS1900)
Execute command
Read command
AT#BND? Return the current band selected in the format:
#BND: <band>
Write command
AT#BND = <band> Set the band parameter to the Band value.
Parameter
<band>:
0 - DCS 1800MHz
1 - PCS 1900MHz
Note: This setting is maintained even after power off.
Test command
AT#BND=? Returns the supported range of values of the parameter <band>.
Example
Reference Telit GM862-PCS AT Command Specification
SW release Version A