Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description
1vv0300604, Rev. ISSUE#14 - 22/01/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 32 of 214
- Angle connector fixing example 2 -
NOTE: in the examples the cable is always bent, this is not a constrain. If the installation does
not require it, then the cable can be kept straight, ensuring that the fixing is without sliding.
2.16.2 Precautions
- The plug should be inserted in the connector only after the installation of the Telit GM862-GPRS
module in the board. This is to prevent accidental breaking of the antenna connection during the
transport.
- The coaxial cable must be fixed at least in one point, without sliding possibilities.
- The plug insertion/removal must be done axially with the female connector of the GM862-GPRS,
keeping lateral strains to a minimum.
- The insertion/crimping pull out force must be less than 15N.