Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description
1vv0300604, Rev. ISSUE#14 - 22/01/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 53 of 214
6.4.1.3 +FCLASS - select active service class
+FCLASS - select active service class
Execute command
Read command
AT+FCLASS? Returns the current configuration value of the parameter <n>.
Write command
AT+FCLASS= <n>
Set the GM862-GPRS in specified connection mode (data, fax, voice), hence
all the calls done after, will be data or voice.
Parameter:
<n>: 0 = data
<n>: 1 = fax class 1
<n>: 8 = voice
Test command
AT+FCLASS=? Returns all supported values of the parameters <n>.
Example
Reference GSM 07.07
SW release Version A
6.4.1.4 &Y - designate a default reset profile
&Y – designate a default reset profile
Execute command
AT&Y <n> The GM862-GPRS is able to store 2 complete configurations (see command
&W). The command &Y defines which one of the 2 profiles will be the
default profile to be loaded on startup.
Parameter: <n> = 0…1 - profile
Note: Differently from ATZ<n> command which simply loads the desired
profile , with the command AT&Y the chosen profile becomes the one
which will be loaded on every startup.
Read command
Write command
Test command
Example
Reference
SW release Version A