Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description
1vv0300604, Rev. ISSUE#14 - 22/01/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 54 of 214
6.4.1.5 &W - store current configuration
&W – store current configuration
Execute command
AT&W <n> Stores on profile n the complete configuration of the device.
Parameter: <n> = 0…1 - profile
Read command
Write command
Test command
Example
Reference
SW release Version A
6.4.1.6 &Z - store telephone number in the Telit GM862-GPRS module internal
phonebook
&Z – store telephone number in the GM862-GPRS internal phonebook
Execute command
AT&Z <n> = <nr>
The GM862-GPRS has a built in non volatile memory in which telephone
numbers of a maximum 24 digits can be stored. The command AT&Z <n> =
<nr> stores in the record n the telephone number nr. The records cannot be
overwritten, they must be cleared before rewriting.
Parameter:
<n>: phonebook record <nr>: telephone number
Note1: To delete the record <n> the command AT&Z<n>= must be issued.
Note2: The records in the GM862-GPRS memory can be viewed with the
command AT&N, while the telephone number stored in the record n can be
dialled by giving the command ATDS=<n>.
Read command
Write command
Test command
Example
Reference
SW release Version A