Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description
1vv0300604, Rev. ISSUE#14 - 22/01/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 92 of 214
6.5.2.5 +CRC - cellular result codes
+CRC – cellular result codes
Execute command
Read command
AT+CRC? Returns current value of the parameter <mode>.
Write command
AT+CRC = <mode>
Controls whether or not the extended format of incoming call indication
is used. When enabled, an incoming call is indicated to the TE with
unsolicited result code +CRING:<type> instead of the normal RING.
Parameter:
<mode> = 0 - disables extended format reporting
<mode> = 1 - enables extended format reporting
Note: On +CRING indication <type> parameter is the call type:
<type> - call type:
ASYNC asynchronous transparent data
SYNC - synchronous transparent data
REL ASYNC - asynchronous non-transparent data
REL SYNC - synchronous non-transparent data
FAX - facsimile (TS 62)
VOICE - normal voice (TS 11)
Test command
AT+CRC=? Returns supported values of the parameter <mode>.
Example
Reference GSM 07.07
SW release Version A