Use and Care Manual

For interior concrete fl oors that demand the highest performance, DaiHard100 Industrial
Strength Epoxy Floor Coating is the choice for heavy-duty, industrial strength epoxy durability,
wear-resistant beauty and easy maintenance. It’s a self-priming formula that can be used on new
or old uncoated or previously coated industrial concrete  oors exposed to foot and vehicular tra c,
as well as intermittent chemical spills, and pressure washing.
Utilizing a modifi ed two-part “100% solids” epoxy chemistry that has been proven for years on
automotive, commercial and industrial fl oor surfaces, this coating delivers excellent abrasion,
impact and chemical resistance.
In turn, DaiHard100 also delivers superior results on the most demanding residential surfaces too
— like garage fl oors, workshops, basements and more.
DaiHard100 is easy to apply by roller or epoxy application
squeegee. It goes on smoothly with excellent hiding
power in one coat.
DESCRIPTION: Pre-tinted, odorless epoxy fl ooring system for concrete.
• garage fl oors • workshops • commercial fl oors
• utility fl oors • basement fl oors • service corridors
• laundry rooms • warehouses • industrial fl oors
COLORS: Two factory-tinted colors available – GRAY and TAN – with matching decorative
broadcast fl akes.
AVAILABLE SIZES: DaiHard-100 comes in a 3.7 Qt. combined volume kit. For larger projects,
DaiHard-100 is also available by special order in 2.5 gallon and 5-gallon confi gurations.
KIT CONTENTS:
• 2.7 quarts of DaiHard Epoxy Resin (Part - A) • 1 quart DaiHard Epoxy Hardener (Part - B)
• decorative fl akes – (also adds slip resistance) • stir stick
APPLICATION: Roll onto clean, dry concrete with a 10mm nap lint free roller — or epoxy
applicator squeegee followed by back-rolling.
COVERAGE: Averages 250 sq.ft. per kit. Varies with substrate and application thickness.
STORAGE: Store this kit indoors in a cool dry place. Do not store outdoors in sheds, trucks, etc.
TOOLS:
SQUEEGEE: Use a quality rubber squeegee (eg. DAICH Epoxy Squeegee Applicator)
ROLLER: Use a lint free 3/8” nap roller for smoother  oors. 1/2” nap roller for pitted or textured  oors.
**OPTIONAL TOOL CHOICE: DAICH Professional Epoxy Applicator Kit.
DaiHard-100 Epoxy System - Primary Benefi ts
• industrial strength performance
• hard, impact-resistant surface
• two pre-tinted colors
• excellent one-coat hiding
• salt & chemical resistance
• up to 60 minute pot-life
• low-odor, zero-VOC formula
• NO HOT-TIRE PICKUP
• Compatible 100% solids epoxy clear top-coat available
for showroom shine and added strength
CHEMICAL RESISTANCE
• gasoline
• motor oil
• garden chemicals
• paint thinner
• salt
• brake fl uid
• transmission fl uid
• acetone
• sulphuric acid
• hydrochloric acid
PHYSICAL PROPERTIES
• Cure time: 24 hours
• Tack-free time (average): 16 hours
• Re-coat: perform prior to cure
• Compressive strength: 12,500 psi
• Tensile Strength: 8,100 psi
DaiHardDaiHard
10 0
®
INDUSTRIAL STRENGTH EPOXY FLOOR COATING
pot-life
• low-odor, zero-VOC formula