TDS

ElastoLock® is a versatile and functional roll-on waterproof membrane that imparts exceptional waterproofing, flexibility
and weathering advantages to many existing surfaces. It’s an easy-to-use, single component, zero VOC, water-based
/ water clean-up coating that exhibits excellent bonding power on concrete, concrete block and wood – as well as tile
backer-board, plasterboard, primed metal and plastic.
As a superior moisture and stain-blocking material – with outstanding ability to
span seams and cracks – ElastoLock® is also an excellent installation surface for
all DAICH Spreadable Stone coatings.
ElastoLock® delivers excellent flexibility with high elongation up to 800%.
Resilience is maintained even in sub-zero temperatures as low as -15º F (-27º C).
Multiple Uses:
ElastoLock® is an excellent solution wherever added protection from water and
vapor are desired:
• Waterproof Surfaces before painting
• Daich Textured Floor and Wall finishes
where a resilient water-proof underlayment is desired
• Flooring Underlayment protective water-proof
membrane prior to tile, hardwood or carpet.
• Wood – part of a water-proof deck coating system
• Basement Walls – blocks water and vapor
• Shower Enclosures – and more
• Balconies – to halt moisture transmission
• Foundation Walls below grade
u
Uses:
Interior and exterior applications on concrete, concrete block, plywood, drywall, tile backer board, fiberglass decking, etc.
As a pliable water-proof membrane, ElastoLock® is used to block intrusion of liquid water, as well as transmission of
moisture vapor and stains.
Used in combination with ElastoLock® Reinforcing Deck Fabric and ElastoLock® Seam Mesh Tape, ElastoLock® is also
an excellent solution for adding a water-proof, resilient protective barrier over plywood decks.
Packaging:
Available in 1 gallon (3.78L) and 5 gallon (20L) container sizes. 55 (US) gallon drums are also available as special orders.
Surface Preparation:
Surface must be clean and dry, stable and free from spalling, efflorescence, dust, dirt, oils, surface flaking, sawdust,
poorly bonded or glossy paint, sealers, salts and other contaminates which may effect adhesion and product
ElastoLock® Performance Features...
• excellent adhesion
• excellent water and vapor blocking
• up to 800% elongation
• spans cracks and seams
• stays flexible in sub-zero temperatures
• blocks stain transmission
• water submersible
• does not support mold growth
• fast dry time (30 - 60 minutes)
• extends exterior paint life
• roller or spray application
• ready to apply
• water-based / water clean-up
• ZERO VOC
Waterproofing - with ElastoLock® Mesh
and Reinforcing Fabric
Moisture Repellent Coating
Coating alone (no mesh / fabric).
Adhesion Promoter - Undercoat
that grabs onto smooth concrete, tile.
For heaviest duty water protection.
A waterproof underlay system for wood decks
& porches, cracked exterior concrete slabs,
balconies, shower enclosures, etc.
For simple, effective water and vapor
repellency. As a protective underlayment
coating before paint, tile, etc. on walls
and floors. Interior / exterior.
Moisture blocking benefits in addition
to good bonding capability on very
smooth surfaces. An ideal adhesive
undercoat before other coatings.
80 sq.ft. (7.5 m
2
) per gal, per coat. Apply two coats
for a final dry thickness of 40 - 60 mils (1/16”).
120 sq.ft. (11m
2
) per gal. Two uniform
coats required.
250 sq.ft. (23m
2
) per gal (two thin
coats recommended)
Variable with substrate conditions and application method/thickness.
COVERAGE RATES:
Flood Protection for Floors and Walls
Water and Vapor Barrier
Undercoat Before Paint
Undercoat Before Tile Mortar
Below-Grade Moisture Barrier
DATA SHEET