MULTIMEDIA SYSTEM USER MANUAL Sınıflandırma : Genel
TIPS, CONTROLS AND GENERAL INFORMATION ROAD SAFETY Learn how to use the various system functions before setting off. Read the instructions for the system carefully before setting off. WARNING If the volume is too loud this can be dangerous. Adjust the volume so that can still hear background noises. (e.g. horns, ambulances, police vehicles, etc.) RECEPTION CONDITIONS Reception conditions change constantly while driving.
For USB sources the system can view images with the following extensions and formats: .JPEG; .JPG; UYARI ALWAYS drive safely with your hands on the steering wheel. You have fully responsibility and assume all risks related to the use of the multimedia system features in this vehicle. Only use multimedia system when it is safe to do so. Failure to do so may result in an accident involving serious injury or death. The system supports FAT16, FAT32, exFAT formatted USB devices.
Volume + Increases volume by one step -> Popup _Volume is shown Volume - Decreases volume by one step -> Popup _Volume is shown Navigation Switches to Navigation STEERING WHEEL CONTROLS Button Function Mute Button Description Press the button for the activation/deactivation of the volume. To cut off the device microphone during BT (Bluetooth) call, press the key to activate mute function. This allows to hear the interlocutor but not being heard from it.
Turning on/off the radio Press button briefly to turn on the device, press again to turn off. RADIO MODE Press the Radio button on the touchscreen, bottom left corner or Radio icon in the Home page, to enter the Radio Menu. Radio Mode Selection In radio main screen Press RADIO button or “FM/AM/DAB” to switch to the bands AM FM and DAB. Each tuning mode can have a specific preselection set. Radio Station Selection In radio main screen turn RADIO button/knob or press desired radio station.
AM/FM Radio Station Tuning Press the icon to enter Direct Tune menu. The graphic keyboard on the display is used to enter the frequency of the station. In this mode, use buttons + and – to fine-tune the frequency. Press button to delete a wrong number (and enter the correct station frequency). Press "Radio" button on the display to return to the system main screen.
tracks stored on USB/iPod are available to play. CAUTION When connecting a device (USB or iPod) to the USB port, make sure that the handbrake lever is not obstructed. If the mobile phone supports Bluetooth connection, the audio files stored on the mobile phone can be listened via the radio in the car. Seek Up/Down (Previous/Next) Press button to play the next selection. (this can be track/picture or video). Press return to the beginning of the selection or the beginning of the previous selection.
Shuffle Press button to play the tracks in a random order. Press again to de-activate this function. Shuffle function can be available if the USB or Bluetooth device supports this function. Repeat Song Press button to cycle between Repeat One, Repeat All and Repeat OFF in loop. Repeat function can be available if the USB or Bluetooth device is supported this function.
Contacts on the phone book of the cell phone can be monitored and called. Contacts on the call record be monitored and called Up to 5 cell phones/digital players can be stored for easier and faster access. The calls on the device can be transferred to cell phone or the calls on the cell phone can be transferred to device. Device microphone can be disabled. Sound files that are stored on mobile phone, can be played over radio device.
After updating the mobile phone's software, it is recommended to remove the phone from the radioconnected devices list, delete the previous connection of the phone from the Bluetooth® list, and register mobile phone again to make the system working better. WARNING Apple phones set the Bluetooth volume to the half of maximum for the first pairing. If the phone volume is low, change the BT level on the radio in Equalizer settings menu, or change the BT level on the mobile phone.
This downloaded phonebook cannot be edited or deleted on the multimedia system. These can only be edited on the mobile phone. The changes are transferred and updated to the multimedia system on the next phone connection. Whenever a mobile phone is connected to the system, a maximum of 3000 contacts can be downloaded and updated for each phone. Depending on the amount of items downloaded from the phonebook, a slight delay can occur before the last names downloaded can be used.
PHONE CALL FEATURES The following features can be accessed through the Multimedia system if the feature(s) are available and supported by Bluetooth on your mobile service plan. For example, if your mobile service plan provides three-way calling, this feature can be accessed through the Multimedia system. Check with your mobile service provider for the features that you have.
Outgoing calls; Missed calls; All calls. To access these types of calls, press the "Recent Calls" button on the Phone menu main screen. Managing an Incoming Call - Answering a phone call When a phone call is received on the mobile phone, the system deactivates the audio system (if active) and displays a popup screen. Press the "Accept" button or the button on the steering wheel controls to answer. Press the "Reject" button or the button on the steering wheel controls to reject.
Press “Hangup & Accept” button to close the ongoing call and answer the new incoming call. Press “Ignore” button to ignore the new incoming call and continue with the ongoing call. IMPORTANT Not all mobile phones may support the management of an incoming call when another phone conversation is active.
Ending a Call Press the "End" button or the button on the steering wheel controls to end a call in progress. Only the ongoing call is ended and any call on hold becomes the new active call. Depending on the type of mobile phone, if the ongoing call is ended by the caller, the call on hold may not be activated automatically. Redialling To call the number/contact of last call made, press the "Call Back" button on the Phone Main Menu.
During a call the microphone can be deactivated pressing the “Mute” button on the touchscreen (or on the steering wheel controls). When the microphone is deactivated it is still possible to listen to the call in progress. To reactivate the microphone, press the corresponding button again. Transferring a Call The ongoing calls can be transferred from the mobile phone to the system and vice versa without ending the calls. To transfer the call, press the "Privacy" button.
Apple CarPlay App Setup Apple CarPlay is compatible with the iPhone 5 or more recent models, with the iOS 7.1 operating system or later versions. Before using Apple CarPlay, enable Siri from "Settings" General Siri on the smartphone. To use Apple CarPlay, the smartphone must be connected to the car with a USB cable. Note: Enabling Apple CarPlay/Android Auto or some functions could require interaction on the smartphone. If necessary, complete the step on your device (smartphone).
Exiting the Android Auto and Apple CarPlay apps With Apple CarPlay app enabled, you can still access the contents of the system by using the controls available (Press button) and viewable on its display. To return to the system contents with the Android Auto app enabled, select the last item on the Android Auto system bar and select “Back to Fiat". To end the Apple CarPlay or Android Auto session, physically disconnect the smartphone from the car's USB port.
Put in reverse (R) and your display will automatically show the rear of your car. Of course ， your screen or radio must be turned on. Settings Press button to enter the Settings menu. The menu includes the following items: Audio Audio related settings are located under this function. (Loudness, Equalizer, Balance & Fader, Speed Volume Control, Ringtone & Phone volume control) Touch Sound Press the relevant button to activate/deactivate the acoustic signal when the buttons on the display are pressed.
Equalizer Select "Equalizer" on the display to adjust the bass, middle and treble tones. Use the "+" or "–" buttons to carry out the settings desired.Tapping on the bass middle or treble bar also is possible to change the value. Then press exit this screen. button to return to the "Audio" menu. Press button to cancel and Balance and Fader Press the "Balance/Fade" button to balance the sound from the front and rear seat speakers. Press the or buttons to balance the front and rear speakers.
Volume Press the “Volume” button to enter into the volume setting interface. Adjust the volume of multimedia (music, video and radio), phone, ringtone and speech. Speed Volume Control "Off" and "1, 2 or 3". The option selected is displayed. Choose "1, 2 or 3" to increase the volume proportionally to the selection made. Then Then press cancel and exit this screen. Sınıflandırma : Genel button to return to the "Audio" menu.
Radio Alternative Frequency and Traffic Announcement functions can be activate/deactivate under Radio setting. AF Setting Press the “AF Setting” button to activation/deactivation of the automatic tuning of the strongest signal for the station selected TA Setting Press the “TA Setting” button to activation/deactivation of the automatic tuning of the traffic announcements.
Set the language by selecting any possible language from the list. General Luminance, AutoPlay, Power Off Delay ,Rear View Camera functions can be activate/deactivate under General setting menu. Luminance Press the "Luminance" button to set the display brightness according to "Day", "Night" condition. AutoPlay AutoPlay is a feature of the multimedia system that automatically begins playing music of the connected device, as soon as it is connected. This feature can be turned on or off in this menu.
System Information System information can be reviewed under this menu and update the software of the radio. Software Update Update the software of the radio, follow the in instructions below; Download updated radio software from http://www.fiatnavigation.com web site. Copy downloaded file to USB disk. Insert USB into USB input of the radio.
FCC ID : 2AOI6-D716AF FCC Regulations （15C）This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
