User's Manual

Sınıflandırma : Genel
System Information
System information can be reviewed under this menu and update the software of the radio.
Software Update
Update the software of the radio, follow the in instructions below;
 Download updated radio software from http://www.fiatnavigation.com web site.
 Copy downloaded file to USB disk.
 Insert USB into USB input of the radio.
 The radio check and recognize the correct file on the USB stick
 If the sw on the USB stick is correct, popup should appear asking if you want to upgrade the
sw (yes – no).
 If yes,Radio will start the upgrade process and restart itself after finishing the process.
 If no,Radio will start to play the media files of the USB.
Restore Settings
Reset the radio to the factory settings will erase all the settings defined by the user previously. Confirm
to reset the device to the factory settings. Wait for a short time for the factory settings to be restored.
Notes:
 Please read this manual thoroughly and keep this manual as a reference before the use of this
device.
 For safe driving, do not look at the display continuously while driving.
 Do not allow liquids or solids to get into the device in order to avoid damage.
Consult your authorized workshop for repair and maintenance.
 Using the device for an extended period while the engine is not running may cause the battery
to discharge.
 Do not touch the screen with hard or sharp objects, as this may cause damage to the screen.
Faults caused by misuse and the following conditions are not covered by the warranty:
 Faults due to electrical components.
 Faults due to external sources (humidity, water, impact, fire, lightning, chemicals, dust).
 Use of non-genuine spare parts that are not approved by the manufacturer.
 Interventions to the device other than authorized service.
 Deleted or altered serial numbered devices.