Service Manual

SiUS281811E Field Setting from Remote Controller
Part 5 Field Settings and Test Operation 117
1.3 Wireless Remote Controller
Setting
To set the field settings, you have to change:
 Mode No.
 First code No.
 Second code No.
To change the field settings, proceed as follows:
1. Press the INSPECTION/TEST button for 4 seconds during normal mode to enter the field
setting mode.
2. Press the MODE button to select the desired mode No.
3. Press the UP button to select the first code No.
4. Press the DOWN button to select the second code No.
5. Press the RESERVE button to confirm the setting.
6. Press the INSPECTION/TEST button to return to the normal mode.
RESERVE button
Mode No.
Field setting mode
UP button
DOWN button
First code No.
Second code No.
MODE button
INSPECTION/TEST
button