Service Manual
Table Of Contents
Service Settings Menu, Maintenance Menu SiUS281811E
68 Part 3 Remote Controller
6.1.1 Service Settings Menu
Service settings menu Item 2 Item 3
Test Operation — —
Maintenance Contact None —
Maintenance Contact —, 0 to 9 (in order)
Field Settings Indoor Unit No. —
Mode No. —
First Code No. —
Second Code No. —
Energy Saving Options Setpoint Range Limitation Temperature
Setback Configuration Recovery Differential
Auto-setback by Sensor Enable/Disable, Settings
Auto-off by Sensor Enable/Disable, Auto-off in (hours)
Prohibit Function Prohibit Buttons Up/Down, Left, Right, On/Off, Mode, Fan Speed
Prohibit Mode Fan, Cool, Heat, Auto, Dry, Vent Clean
Min Setpoints Differential None, Single SP, 0 to 8°C —
Group Address Group Address (Group) Gr Addr. Set
Group Address (Unit) Unit No., Gr Addr. Set
Indoor unit AirNet Address Unit No., Address Set —
Outdoor unit AirNet Address Unit No., Address Set —
Error History RC Error History Unit No., Error, Date, Time
(Up to 10 errors received by the remote controller can be
displayed.)
Indoor unit Error History Unit No., Error, Date, Time
(Up to 5 errors from the indoor unit error record can be
displayed.)
Indoor Unit Status Unit No. —
Th1 Suction air thermistor
Th2 Heat exchanger liquid pipe thermistor
Th3 Heat exchanger gas pipe thermistor
Th4 Discharge air thermistor
Th5 Remote controller thermistor (FBQ, FTQ)
Floor temperature thermistor (FCQ)
Th6 Control temperature thermistor (FBQ, FCQ, FTQ)
Outdoor Unit Status Unit No. —
Th1 —
Th2 —
Th3 —
Th4 —
Th5 —
Th6 —
Forced Fan ON Unit No. —
Switch Main Sub Controller — —
Filter Indicator — —
Test Filter Auto Clean — —
Brush/Filter Ind. — —
Disable Filter Auto Clean No, Yes —