Operation Manual

10
COOLING · “SARARA” DRYING Operation
COOLING operation
To lower temperture
Press .
• The multi-monitor lamp of the unit will turn on GREEN.
To lower temperture and humidity
Press .
• The multi-monitor lamp of the unit will turn on YELLOW.
* It is recommended to switch to COOLING operation if you want to lower
temperature preferentially during DRY COOLING operation.
“SARARA” DRYING operation
To lower humidity
Press .
• The multi-monitor lamp of the unit will turn on YELLOW.
 To stop operation
Press .
• The multi-monitor lamp of the unit will go off.
 To change the temperature or humidity setting
COOLING DRY COOLING DRY
64°F – 90°F (18°C – 32°C) –5°F (–3°C) – STD
OFF HIGH STD LOW CONT HIGH STD LOW CONT
GREEN YELLOW
NOTE
 Note on ON/OFF button
• Pressing will start the same operation as the last time.
 Note on COOLING operation
• This air conditioner cools the room by blowing the hot air in the room outside, so if the outside temperature is high, performance drops.
 Notes on DRY COOLING
• Pressing the humidity button down in COOLING operation set the unit to DRY COOLING.
• Removes more humidity than the normal COOLING operation. It is recommended, however, to set temperature slightly lower than the room
temperature to lower humidity because this operation mode does not heat air supplementary.
 Notes on “SARARA” DRYING operation
• Removes humidity with less lowering of the room temperature by heating air supplementary.
• The operation mode change from COOLING to “SARARA” DRYING may raise humidity temporarily.
01_EN_3P226009-1A.indd 10 10/29/2012 2:11:53 PM