Operation Manual
17
English
COMFORT SLEEP Operation
Controlling the room temperature supports comfort sleep and pleasant wake-up.
• Check that the clock is correct. If not, set the clock to the present time.
Page 9
• The present time display disappears when the COMFORT SLEEP operation is set.
1. Press during operation.
blinks.
is displayed.
2. Press to set the time to wake up.
• Pressing the button changes the time in 10 minutes. Holding the button makes the time
change faster.
3. Press .
is displayed.
is displayed.
• When settings are made while the unit is not running, press to start the operation.
To cancel COMFORT SLEEP operation
Press .
ATTENTION
• Make the room temperature comfortable to some extent before sleep.
<Recommended set temperature> COOLING .....................79°F – 84°F (26°C – 29°C)
HEATING ......................68°F – 77°F (20°C – 25°C)
* Too low set temperature may cause you to get chilled while asleep.
NOTE
Notes on COMFORT SLEEP operation
• Can be used for COOLING, DRY COOLING and HEATING.
• Cannot be used with TIMER operation.
How to use COMFORT SLEEP operation effectively
• Starting COMFORT SLEEP operation lowers the set temperature by 3.6°F (2°C) in 3 hours and starts raising
it by 1.8°F (1°C) 1 hour before the set time, offering V-curve temperature control. (See the right gure.)
• Set the airow direction so that the air from the unit does not directly blow on the occupants of the room.
0
Sleeping time
(For 6 hours of sleep)
Set
temper-
ature
2hours2hours
1
ON
2 3 4 5 6
–1°C
ON
–2°C
Set wakeup time
Wakeup
Set wakeup time
Wakeup
1hour1hour3hours3hours
01_EN_3P226009-1A.indd 17 10/29/2012 2:12:01 PM