Operation Manual

20
Care and Cleaning
Quick reference
CAUTION
• Before cleaning, be sure to stop the operation and turn the breaker off.
• Do not touch the aluminum ns of the indoor unit. If you touch those parts, this may cause an injury.
To reset the lter cleaning indicator
While the unit is not operating, the lter cleaning indicator may be displayed on the remote
controller depending the amount of time the unit had been operating. This sign indicates the
cleaning timing for the air lter, Titanium apatite photocatalytic air-purifying lter, deodorizing lter
for streamer or streamer unit.
After cleaning, press for about 2 seconds directing the remote
controller toward the main unit with powered off.
• Indication disappears.
NOTE
• “CLEAN FILTER” sign will appear after about 340 hours of operation.
• “CLEAN STREAMER” sign will appear after about 1800 hours of operation.
• Operating the unit without cleaning with the “CLEAN STREAMER” sign displayed will lower the deodorizing capability.
• Periodical cleaning leads to energy saving.
Front panel
Wipe off
if it gets dirty.
Page 21
Air lter
Vacuum Rinse
if “CLEAN FILTER” displays.
Page 23
Titanium apatite
photocatalytic air-
purifying lter
(black)
Soak
if “CLEAN STREAMER” displays.
• Replace once in about 3 years.
Page 26
Upper panel
Wipe off
if it gets dirty.
Page 22
Deodorizing lter for
streamer
(black)
Soak
if “CLEAN FILTER” display.
• Replace once in about 3 years.
Page 26
Streamer unit
Soak
if “CLEAN STREAMER” displays.
• Replace once in about 3 years.
Page 26
01_EN_3P226009-1A.indd 20 10/29/2012 2:12:05 PM