Operation Manual

English

CAUTION

• Be careful not to cut yourself when disassembling and assembling the streamer unit.

Cleaning the indoor unit and the remote controller

• Wipe with a soft dry cloth.

For cleaning, do not use hot water above 104°F(40°C), benzine, gasoline, thinner, nor other volatile oils, polishing compound,

scrubbing brushes, nor other hand stuff.

How to replace

 Deodorizing lter for streamer

(Once in about 3 years)

• Remove from the lter frame and replace the lter with a

new one.

Filter frame

• The deodorizing lter for stream and the titanium apatite

photocatalytic air-purifying lter do not have front and back sides.

• Dispose a used lter as burnable waste. (material: paper)

 Titanium apatite photocatalytic

airpurifying lter

(Once in about 3 years)

• Discharge the 4 tabs of the lter frame and replace the

lter with a new one.

Titanium apatite

photocatalytic

air-purifying filter

Filter frame

Holes (4 locations)

Tabs (4 locations)

How to disassemble and assemble the streamer unit

 Before disposing the streamer unit, disassemble it.

How to disassemble

• Use gloves for safety.

• Apply one hand to

part and push the plastic part with another hand.

• Disassemble the streamer unit into the plastic cover and the discharge plate.

• Match up the securing parts of the various parts of the streamer unit and assemble as it was.

OPEN

Apply a finger to

part.

Streamer unit

Push the

plastic part.

• Disassembly

Discharge plate

Plastic cover

Securing part

01_EN_3P226009-1A.indd 27 10/29/2012 2:12:13 PM