Service Manual

SiUS04-921 Indoor Unit
Removal Procedure 193
1.12 Removal of Propeller Fan / Fan Motor
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points
1. Removal of the right side
panel
Preparation
 Remove the heat exchanger
according to "Removal of the
Heat Exchanger."
1
Remove the 2 screws of
the right side panel.
2
Release the far side hook
of the right side panel
while inclining toward
yourself and then remove
it.
2. Removal of the fan rotor
1
Remove the 1 screw of
the fan motor fixture.
2
Release the 2 hooks and
remove the fan motor
fixture.