Service Manual

Table Of Contents

Field Settings SiUS121502E

192 Trial Operation and Field Settings

4.3 FFQ Series

4.3.1 How to Change the Field Settings

Outline If optional accessories are mounted on the indoor unit, the indoor unit setting may have to be

changed. Refer to the instruction manual for each optional accessory.

BRC1E71/72/73

Note: The illustrations are for BRC1E72 as representative.

a Unit No.

b First code No.

c Second code No.

d Mode

Step Action Remote controller

Press and hold the Cancel button for 4

seconds to enter the Service Settings menu.

Use the buttons to select Field Settings

and push the Menu/OK button.

Use the buttons to select the desired

Mode.

During group control, when setting by each

indoor unit (Mode 20, 21, 22 or 23 have been

selected), push the button to highlight and

buttons to select the Unit No. to be set.

This operation is unnecessary when setting by

group.

Highlight the second code No. to be changed

using the buttons, and use the

buttons to select the desired second code No.

When setting by group, all of the second

code No. that may be set are displayed as

(R18831)

(R18832)

(R18831)

(R18833)