Service Manual

SiUS121502E Field Settings
Trial Operation and Field Settings 193
BRC7E830
To set the field settings, you have to change:

Mode No.

First code No.

Second code No.
6
Push the Menu/OK button to display the
confirmation screen.
7
Use the buttons to select Yes and push the
Menu/OK button.
When multiple setting changes are
needed, repeat steps 3 to 7.
8
Push the Cancel button 2 times to return to
basic screen.
Step Action Remote controller
(R18834)
Step Action
1 Press the INSPECTION/TEST button for 4 seconds during normal mode to enter the
field setting mode.
2 Press the MODE button to select the desired mode No.
3 Press the UP button to select the first code No.
4 Press the DOWN button to select the second code No.
5 Press the RESERVE button to confirm the setting.
6 Press the INSPECTION/TEST button to return to the normal mode.
RESERVE button
Mode No.
Field setting mode
UP button
DOWN button
First code No.
Second code No.
MODE button
(R18955)
INSPECTION/TEST
button