Operation Manual
Table Of Contents
- Feature
- Contents
- Safety Considerations
- Names of Parts
- Preparation before Operation
- AUTO · DRY · COOL · HEAT ·FAN Operation
- Adjusting the Airflow Directionand Rate
- COMFORT AIRFLOW /INTELLIGENT EYE Operation
- POWERFUL Operation
- OUTDOOR UNIT QUIETOperation
- ECONO Operation
- OFF TIMER Operation
- ON TIMER Operation
- WEEKLY TIMER Operation
- Note for Multi System
- Care and Cleaning
- Troubleshooting
- Quick Reference
Panel tab
30
English
Care and Cleaning
Quick reference
How to open / close the front panel
• Hold the front panel by the panel tabs on the both sides and open it.
• Press the front panel at both sides and the center to close it.
Cleaning parts
Notes on cleaning
For cleaning, do not use the materials as follows.
• Hot water above 104°F (40°C).
• Benzine, gasoline, thinner, other volatile oils.
• Polishing compound.
• Scrubbing brushes, other hard stuff.
CAUTION
• Before cleaning, be sure to stop the operation and turn the breaker off.
• Do not touch the aluminum ns of the indoor unit. If you touch those parts, this may cause an injury.
Air lter
• Vacuum dust or wash the
lter.
Once every 2 weeks
Refer to
Page 32
Titanium apatite photocatalytic air-purifying lter
• Vacuum dust or replace the lter.
[Cleaning] [Replacement]
Once every 6 months Once every 3 years
Refer to
Page 33
Refer to
Page 33
Front panel
• Wipe it with a soft damp cloth.
If bothered by dirt
Refer to
Page 31
Indoor unit,
Outdoor unit and
Remote controller
• Wipe them with a soft cloth.
If bothered by dirt
01_EN_3P297290-2C.indd 30 12/8/2015 13:30:43