Operation Manual
Table Of Contents
- Feature
- Contents
- Safety Considerations
- Names of Parts
- Preparation before Operation
- AUTO · DRY · COOL · HEAT ·FAN Operation
- Adjusting the Airflow Directionand Rate
- COMFORT AIRFLOW /INTELLIGENT EYE Operation
- POWERFUL Operation
- OUTDOOR UNIT QUIETOperation
- ECONO Operation
- OFF TIMER Operation
- ON TIMER Operation
- WEEKLY TIMER Operation
- Note for Multi System
- Care and Cleaning
- Troubleshooting
- Quick Reference
32
English
1. Pull out the air lters.
• Open the front panel.
• Push the lter tab at the center of each air lter
slightly upward, then pull it down.
1) Push
2) Pull down
2. Wash the air lters with
water or clean them with
vacuum cleaner.
• It is recommended to clean the air lters every
2weeks.
If the dust does not come off easily
• Wash the air lters with neutral detergent thinned with
lukewarm water, then let them dry in the shade.
• Be sure to remove the titanium apatite photocatalytic
air-purifying lter. Refer to “Titanium apatite
photocatalytic air-purifying lter” on the next page.
3. Set the lters as they were
and close the front panel.
• Press the front panel at both sides and the central
area.
Air lter
CAUTION
• Do not touch the aluminum ns by bare hand at the time of dismounting or mounting the lter.
01_EN_3P297290-2C.indd 32 12/8/2015 13:30:44