Operation Manual
10
NOTE
■ Note on setting the clock
• If the indoor unit’s internal clock is not set to the correct time, the ON TIMER, OFF TIMER and WEEKLY TIMER will not operate punctually.
■ Turn the breaker on
• After the power is turned on, the flaps of the indoor unit open and close once to set the
reference position.
■ To set the clock
1.Press .
• “ ” is displayed on the LCD.
• “ ” and “ ” blink.
2.Press to set the current day of the week.
3.Press .
• “ ” blinks.
4.Press to set the clock to the present time.
• Holding down or rapidly increases or decreases the time display.
5.Press .
• Point the remote controller at the indoor unit when pressing the buttons.
• “ ” blinks.