Operation Manual

You can adjust the airflow direction to increase your comfort.

■ To start auto swing

Press .

• “ ” is displayed on the LCD.

• The flap (horizontal blade) will begin to swing.

■ To set the flap at desired position

• This function is effective while flap is in auto swing mode.

Press when the flap has reached the

desired position.

• “ ” disappears from the LCD.

■ To adjust the louvers at desired position

Hold the knob and move the louvers.

• You will find a knob on the left-side and the right-side

blades.

• When the unit is installed in the corner of a room, the

direction of the louvers (vertical blades) should be facing

away from the wall.

If they face the wall, the wall will block off the wind,

causing the cooling (or heating) efficiency to drop.

• If the flap is in the way, press on the remote controller to move the flap out of the

way and then adjust the louvers.

Up and down airflow direction

Adjusting the Airflow Direction

and Rate