Operation Manual

15
The flow of air will be in the upward direction while in COOL operation and in the
downward direction while in HEAT operation, which will provide a comfortable
wind that will not come in direct contact with people.
NOTE
■ Notes on COMFORT AIRFLOW operation
• The flap position will change, preventing air from blowing directly on the occupants of the room.
• POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• The airflow rate will be set to Auto. If the upper and lower airflow direction is selected, the COMFORT AIRFLOW operation will be canceled.
■ To start COMFORT AIRFLOW operation
Press .
• “ ” is displayed on the LCD.
• Airflow rate is set to Auto.
COOL/DRY: The flap will go up.
HEAT: The flap will go down.
■ To cancel COMFORT AIRFLOW operation
Press again.
• The flaps will return to the memory position from before COMFORT AIRFLOW operation.
• “ ” disappears from the LCD.
COOL operation HEAT operation
COMFORT AIRFLOW Operation