Operation Manual

32
Removing the front panel
CAUTION
When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully.
When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.
After cleaning, make sure that the front panel is securely fixed.
1.Remove the front panel.
Slide the front panel to either the left or right and
pulling it toward you.
This will disconnect the rotation dowel on one side.
Disconnect the front panel shaft on the other side in
the same manner.
2.Clean the front panel.
Wipe it with a soft cloth soaked in water.
Only neutral detergent may be used.
In case of washing the panel with water, wipe it with
dry soft cloth, dry it up in the shade after washing.
3.Attach the front panel.
Align the front panel shaft on the left and right of the
front panel with the slots, then push them all the
way in.
Close the front panel slowly.
Press the front panel at both sides and the center.
1) Slide
2) Pull
Front panel shaft
Slot