Operation Manual

5
Indoor Unit
Room temperature
sensor
• It detects the air temperature
around the unit.
INTELLIGENT EYE
sensor
• It detects the movements of
people and automatically
switches between normal
operation and energy saving
operation.
►Page 15
Model name
plate
Louvers (vertical blades)
• The louvers are inside of the air outlet. ►Page 13
Flap (horizontal blade) ►Page 13
Air oulet
Front panel
Air inlet
Display
OPERATION lamp
(green)
TIMER lamp (yellow)
INTELLIGENT EYE lamp
(green)
►Page 16
Indoor unit ON/OFF switch
• Press this switch once to start operation.
Press once again to stop it.
• For the operation mode setting, refer to the following table.
• This switch can be used when the remote controller is missing.
Mode Temperature setting Airflow rate
AUTO 25°C AUTO
Signal receiver
• It receives signals from the remote
controller.
• When the unit receives a signal, you will
hear a beep sound.
Case Sound type
Operation start beep-beep
Setting changed beep
Operation stop long beep
►Page 21
Name of Parts