Service manual

Main Functions SiBE05-722_C

32 Function and Control

1.9 HOME LEAVE Operation

Outline HOME LEAVE operation is a function that allows you to record your favorite set temperature

and airflow rate. You can start your favorite operation mode simply by pressing the [HOME

LEAVE] button on the remote controller.

Detail Start of Function

The function starts when the [HOME LEAVE] button is pressed in cooling operation, heating

operation (including POWERFUL operation), or while the operation is stopped. If this button is

pressed in POWERFUL operation, the POWERFUL operation is canceled and this function

becomes effective.



The [HOME LEAVE] button is ineffective in dry operation and fan operation.

Details of Function

A mark representing HOME LEAVE is indicated on the display of the remote controller. The

indoor unit is operated according to the set temperature and airflow rate for HOME LEAVE

which were pre-set in the memory of the remote controller.

The LED (red) of indoor unit representing HOME LEAVE lights up. (It goes out when the

operation is stopped.)

End of Function

The function ends when the [HOME LEAVE] button is pressed again during HOME LEAVE

operation or when the [POWERFUL] button is pressed.

HOME LEAVE operation

Start

Stop

(R11613)

Time

Set temp.

Normal operation

“HOME LEAVE operation”

set temp.

(R11614)