Service manual

SiBE05-722_C Service Check Function
Service Diagnosis 59
5. Press the [TEMP]  or  button and change the number until you hear the long beep.
6. Diagnose by the sound.

beep : The left-side number does not correspond with the error code.

two consecutive beeps : The left-side number corresponds with the error code but
the right-side number does not.

long beep : Both the left-side and right-side numbers correspond with the error code.
7. Determine the error code.
The numbers indicated when you hear the long beep are the error code.
Error codes and description
→
Refer to page 60.
8. Press the [MODE] button to exit from the diagnosis mode.
The display means the trial operation mode.
Refer to page 111 for trial operation.
9. Press the [ON/OFF] button twice to return to the normal mode.
Note: When the remote controller is left untouched for 60 seconds, it returns to the normal mode.
(R4277)
(R4278)
(R14969)
(R9670)