Specifications
Option List Si38-304
312 Appendix
Building management system
*
LONWORKS
is a registered trade mark of Echelon Corporation.
No. Part name Model No. Function
1 intelligent Touch Controller
Without
PPD
DCS601B51
Air-Conditioning management system that can be controlled by a
compact all-in-one unit.
PPD: Power Proportional Distribution function
New Functions: • Auto cool/heat change-over •Temperature limitation
• Multilingual (English, French, German, Spanish,
Italian, or Chinese)
With
PPD
DCS601B51
DCS002B51
1-1 Electrical box with earth terminal (4blocks) KJB411A
Wall embedded switch box.
2
intelligent Manager
ECO 21
Number of
units to be
connected
128 units DAM602A52
Air conditioner management system (featuring minimized engineering)
that can be controlled by personal computers.
192 units DAM602A53
256 units DAM602A51
512 units DAM602A51x2
768 units DAM602A51x3
1024 units DAM602A51x4
3
Communication
Line
BACnet Gateway DMS502A51
Interface unit to allow communications between VRV and BMS.
Operation and monitoring of air-conditioning systems through BACnet
communications.
4
DMS-IF
(for use in LON WORKS
networks)
DMS504B51
Interface unit to allow communications between VRV and BMS.
Operation and monitoring of air-conditioning systems through L
ON
WORKS
communication.
5 Optional DIII board DAM411A1
Expansion kit, installed on the BACnet Gateway (DMS502A51), to
provide 3 more DIII-NET communication ports. Not usable
independently.
6 Optional Di board DAM412A1
Expansion kit, installed on the BACnet Gateway (DMS502A51), to
provide 16 more wattmeter pulse input points. Not usable
independently.
7 Optional DIII Ai unit DAM101A51 Analog input for "sliding temperature" function (to reduce cold shock).
8
Contact/analog signal
Parallel
interface
Basic unit DPF201A51
Enables ON/OFF command, operation and display of malfunction; can be
used in combination with up to 4 units.
9
Temperature
measurement units
DPF201A52 Enables temperature measurement output for 4 groups; 0-5VDC.
10 Temperature setting units DPF201A53 Enables temperature setting input for 16 groups; 0-5VDC.
11
Unification adaptor for computerized
control
DCS302A52 Interface between the central monitoring board and central control units
12-1
Wiring adaptor for electrical
appendices (1)
KRP2A61, 62
Simultaneously controls air-conditioning control computer and up to 64 groups
of indoor units.
12-2
Wiring adaptor for electrical
appendices (2)
KRP4A51-53
To control the group of indoor units collectively, which are connected by the
transmission wiring of remote controller.
13
External control adaptor for outdoor
unit (Must be installed on indoor units.)
DTA104A61, 62
Cooling/Heating mode change over. Demand control and Low noise control
are available between the plural outdoor units.
: http://splitoff.ru/tehn-doc.html