Operation Manual

1. LCD (with backlight)
» LCD backlight illumination lasts approximately
30 seconds after pressing any button.
» If two remote controllers are used to control a single indoor unit,
only the controller used first will have backlight functionality.
2. Operation mode selector button
» Press to select operation mode (Cool/Heat/Fan/Auto/Dry).
» If the display shows the icon, heat or cool
mode will not be available for selection.
3. Menu/OK button
» Press to display main menu. Navigate to desired
menu item and press to select item.
4. Fan speed control button
» Press to select preferred fan speed.
5. Up arrow button
» Press to raise
setpoint.
» Press to navigate up.
6. Down arrow button
» Press to lower
setpoint.
» Press to navigate
down.
7. Right arrow button
» Press to navigate
right.
8. Left arrow button
» Press to
navigate left.
9. Operation lamp
» Lamp illuminates
solid green when unit is ON and operating normally.
» Lamp flashes green when an operation error occurs.
10. On/Off button
» Press to turn unit ON or OFF.
11. Cancel button
» Press to cancel selection and return to the previous screen
1. Operation Mode
» Displays current operation mode: Cool, Heat, Vent, Fan, Dry
or Auto. In Auto mode, the current operation mode (Cool or Heat)
is also displayed.
2. Fan Speed
» Displays the current fan speed. (Note: Some units do not include
fan speed control or display fan speed.)
3. Setpoint
» Displays the setpoint of the indoor unit.
» Go to Menu > Celsius/Fahrenheit to select the temperature unit
(°C or °F).
4. Standby for Defrost/Hot start
» Displays “STANDBY” notice when in defrost or hot start status.
5. Message
» Displays warning and error messages.
6. Ventilation
» Displays when unit is connected to an Energy Recovery Ventilator
(ERV). Ventilation Mode icon AUTO-ERV, ERV, and BYPASS
indicate the current ventilation mode for the ERV unit.
» Air purify icon AIR PURIFY indicates that the air purifying unit
(optional) is operating.
7. Key Lock
» Displays the button lock icon when set.
8. Scheduled
» Displays when the Schedule or OFF timer is enabled.
9. Under Centralized control
» Displays when unit is controlled by a multi-zone controller
(optional), and unit operation through the remote controller
is limited.
10. Changeover Controlled by the Master Indoor Unit
» Displays when the connected unit does not have the authority
to change the operation mode between cooling and heating.
11. Setback
» Setback icon flashes when unit is turned ON by the
setback control.
12. Airflow Direction
» Displays the airflow direction/swing status. This item only
displays if connected unit features oscillating louvers.
13. Current Day/Time (12/24 Hour Time Display)
» Displays the current time setting. If clock is not set, “-- : --”
is displayed.
» Go to Main Menu > Clock & Calendar to set 12 or 24 hour
display option.
14. Selectable Display Item
» Room temperature is selected by default. Go to Menu >
Configuration > Display > Display item to select display item.
15. Unable to Schedule
» Displays when clock is not set. (Note: The schedule function
requires the clock to be set.)
A. Standard screen mode display items.
B. Detailed screen display mode includes airflow direction,
current day/time, selectable display items.
C. Simple screen display mode only shows primary function items.
– *Airflow Direction
– *Individual Airflow Direction
– *Ventilation
– Schedule
– Off Timer
– Celsius / Fahrenheit
– Filter Auto Clean
– Maintenance Information
– Configuration
– Current Settings
– Clock & Calendar
– Daylight Saving Time
– Language
Main Menu
*Depending on connected model
Button Locations and Descriptions
Screen Display Modes and Descriptions Screen Items Descriptions
1. LCD
5. Up arrow button
6. Down arrow button
7. Right arrow button
8. Left arrow button
9. Operation lamp
10. On/Off button
11. Cancel button
2.Operation mode
button
3. Menu/OK button
4. Fan speed
control button
Quick Operation Manual
BRC1E73 – Navigation Remote Controller
Set the screen display mode from: Main Menu-Configura-
tion-Display-Display Mode. Three screen display modes
are available: Standard, Detailed, and Simple. Standard display
is set by default.
2018