Installation Manual

English 9

Bottom outlet

P1P2

CAUTION

• Keep the wiring away from the power wire so that electrical noise (external noise) is not received.

• In order to prevent the entry of water or insects, use putty (eld supply) to securely seal the wiring

lead-in hole.

Closing the controller

1 : Place the top of the controller on the

top of the back plate.

2 : Snap the bottom of the controller into

place on the bottom of the back plate.

3 : Ensure the installation site is dust-free,

before peeling the protective seal.

CAUTION

• Never touch the internal parts of the controller.

• When closing the controller, be careful not to pinch the wiring.

• To prevent damage, make sure the front of the controller is clicked into the back plate securely.

01_EN_EM19A026_IM.indd 9 2020/09/08 14:21:01